|
|
|
 GF Series, Continuous type
|
|
|
Continuous Multi-Purpose Capability
The GF series– in different designs for all known fluid bed processes in
continuous operation:
GFG Granulator
GFC Coater
GFP Pelletizer
GFT
Dryer (Trockner)
GFK Cooler
|
|
|
 |
|
|
|
Glatt GFC 750 fluid bed coater
|
|
|
|
Due to the modular design, the air feed chamber, process chamber, filter
system and spray system can be combined in order to match the system to the
customer's specific process requirements. Discharge with zigzag screen as GFP
for manufacturing pellets from liquid starting materials.
Combination - the feed air chamber, which is divided into zones, allows
different process conditions to prevail in the process chamber. Typical
combinations are granulation with drying and/or cooling but granulation and
coating are also possible.
|
|
|
Glatt GFC 750 fluid bed coater -
view into process chamber
|
| |
Variable filter system
Depending on the process requirements and the customer's request, internal
filters in the form of filter bags or filter cartridges, filter material
according to the process requirements and an external filter or cyclone in
combination with a wet washer.
|
| |
Safety
Explosion suppression systems allow a residual pressure shock resistance of 0.4bar. This can also be easily achieved without using a round design.
|
|
|
 |
|
|
Glatt GFC 25 fluid bed coater
|
| |
Cleaning
Easy accessibility to the fluid bed system, optional cleaning nozzles, common
cleaning water discharge, filter as an exchangeable unit or cleanable in
place.
|
| |
Control system
SIEMENS, Allen Bradley, Mitsubishi and Freelance have already been
implemented, basically at the customer's request.
All control systems are
designed and manufactured in-house by Glatt based on hardware and software that
has become established throughout the world.
The advantage for you is an
individual control system and world-wide local support. This guarantees high
availability for your system (-> Process
Control Systems). |
| |
A GF (Glatt continuous fluidized bed) for drying, cooling and demanding
agglomeration and coating processes (-> Fluid Bed Granulation, -> Fluid Bed
Coating).
Very gentle handling of temperature-sensitive
materials.
High throughputs from 20kg/h to 10t/h.
|
| |
 |
Continuous Multi-Purpose
Capability.
Whether granulating, coating, pelletizing, drying and cooling – a system for all
processes. Processes can be combined in one system. |
| |
Variable filter system.
With internal or external filter depending on process requirements.
|
| |
Safety
No pressure relief ducts due to explosion suppression.
|
| |
|
| |
| |
|
|
Technical Processes
|
|
▶ Coating
▶ Granulation
▶ Drying
|
|
Process Principles
|
|
▶Drying
▶Agglomeration
/Granulation
▶Spray Granulation
▶Film Coating
▶Lipid/Hot melt Coating
|
|
